Waders should be washed by hand, in a bathtub, in cold water using a powder detergent. Rinse thoroughly and allow to air dry, including the feet. Packaging or storing your waders wet may result in mildew and tape peeling. Simms Waders should not be dry-cleaned or put in the dryer. A water repellent treatment, such as Revivex®, will rejuvenate the water resistant finish on your waders.
After the waders are washed and thoroughly rinsed, saturate the outside of the waders with Revivex® or other water repellent treatment. Allow product to drip-dry. "Set" the treatment with heat using a blow dryer or iron (low setting), avoiding the stockingfoot attachment area.
Tears, punctures and pinholes do happen. Luckily, Gore-Tex® waders are easy to repair. 1) Turn waders inside out. 2) Apply rubbing alcohol to suspect area. Leaks will show as dark gray spots. 3) Immediately apply AquaSeal® to the area and cure for six hours. Please note: this method will not work on seam leaks. If you think you have a seam leak, call 406-585-3557 for information on returning your waders for repair.
It is best to clean the waders and check for leaks before storing. Apply self-repairs for pinholes or contact Simms for the return process for a complete wader evaluation. Dry waders completely before storing to avoid mildew. Store the waders away from heat or direct light. Hung in a closet on a hanger or laying flat under a bed is best for long-term wader storage.
Follow this link to the REPAIR CENTER to process return waders for evaluation and repair. Or call our Customer Service Department at 888-585-3570.